From Germany, AQUABION® has over 10 years of testimonials and University endorsements, is easy to install and works using sacrificial Zinc anodes, neutralising limescale so it doesn’t calcify on heating elements, pipe work or appliances, preventing expensive repairs and replacements. Guaranteed for 5 years and with an average lifespan of 7/8 years, AQUABION® requires NO MAINTENANCE over its lifetime! It’s safe to drink water treated through an AQUABION® – no salt is used.
The Aquabion takes away all the negatives of hard water but still provides you with the positive such as naturally occurring minerals and no added salt.
Limescale doesn’t only affect your bathroom. It has an impact on the efficiency of boilers, showers, hot water tanks, washing machines, irons, and taps. Water that has been treated by the in-line Aquabion water conditioners is perfectly drinkable, still and includes all the essential minerals that occur naturally. Aquabion is easy to install, has an unsurpassed international track record and most importantly, it works.
Left untreated, limescale increases the cost of daily living through the increased use of energy and of course the premature failure of appliances and hot water systems. It is estimated that the UK spends over £1,000,000,000+ in extra in energy just because of limescale!
Salt dosing water products are designed to soften water. This process has many drawbacks because sodium is released into the treated water. Non-dosing treatments also have a long list of unhappy customers. Our limescale solution has been independently tested and proven to reduce limescale in water systems, saving up to 55% of energy costs. Payback can be very fast, due to the wide spectrum of savings in household chemicals, water heating as well as ensuring that your appliances last longer.
There are many different technologies that many different manufacturers use to try and create the elusive non-adhering lime. However, Zinc has always been preferred. The BIG problem has always been fouling. Our patent is there to stop the fouling from happening.
The Aquabion uses a galvanic and electrolytic solution which is combined with our patented self-cleaning agitators. This means that the tiny amounts of zinc ions that are released react with the calcite ions to create non-adhering lime.
Domestic and industrial users get the same technology and are built to the same standard.
AQUABION® is a treatment for limescale in water systems consisting of a Brass plumbing fitting containing Zinc and Stainless-Steel components which is fitted into the incoming water main pipe of a house or a commercial/industrial property. It requires no electricity, salt, or any other additive, requires no maintenance, is guaranteed for 5 years, and will work for about 7-8 years on average(domestic).
AQUABION® protects hot water systems (pipes & appliances) from the harmful effects of limescale. Limescale can reduce the efficiency and increase the cost of running hot water systems and reduce the lifespan of appliances such as electric showers, immersion heaters, washing machines, dishwashers, and kettles costing you hundreds, if not thousands, of Euro per year.
Put simply, it can turn aggressive ‘hard’ Limescale into non-aggressive less-adhering ‘softer feeling’ Limescale. The Zinc block inside the AQUABION® is very slowly releasing tiny amounts of Zinc which bond with the limescale in the water. More scientifically put, it is a galvanic or electrolytic process whereby an ion exchange occurs between the aggressive Limescale (CaC03 – or Calcite*) and the pure Zinc sacrificial anode inside the AQUABION® forming Aragonite (ZNC03 – or non-aggressive ‘softer feeling’ Limescale). This has the appearance of a white powder on your sink or shower which you can clean away much easier i.e. it does not stick as much to your appliances or require such aggressive cleaners as before.
*Calcite is the chemical name for aggressive Limescale. It means that when heated it attaches to pipework and heating coils which causes all the damage to your plumbing appliances and increases the heating costs.
No, being neat is the only advantage as it takes up so little room, but that does not mean that it is less effective. Size doesn’t matter!
Yes, but it will stick much less to the heating elements in your hot water cylinder, dishwasher, washing machine, electric shower, etc. and it won’t clog up the pipework. In addition, it can also help to slowly reverse some of the old scales build up in your appliances.
Yes, fitting an AQUABION® can slowly reverse some of the build-ups, gradually breaking down the hard Limescale encrusted on your appliances’ heating coils and internal pipework in combination when enough water is flowing to support the erosive process.
If you have a water softener you are spending money annually maintaining it (topping up salt levels, electricity, higher water bills, and servicing it). For the same annual cost (when you spread the one-off cost of any AQUABION® over its life span of approx 7 – 8 years) you will have all the advantages of AQUABION® and none of the annual costs of a water softener.
Ideally, fit it to the water mains where it enters your home, either in the garage with pressure coming from your water supplier or underneath the kitchen sink when you have an attic storage tank. The AQUABION® unit does not take up much space in your kitchen cabinet, unlike a water softener, and is easily installed.
Yes, but it must be frost protected – insulated – on the water mains either in a sealed service box below ground or lagged if above ground e.g. in a garage or shed. Ideally, you would fit it inside the house.
Yes, but as with installing water softeners, you must get your water tested first to see what exactly is the problem with your water supply. AQUABION® is designed to treat Limescale only. If you have other issues with your water such as high iron content (above 0.2mg/L), you will need suitable filtration or iron pre-treatment. High Iron levels in your water may destroy the AQUABION® and will invalidate the warranty. This advice applies to water softeners as well as AQUABION® as neither removes Iron from the water to potable standard. If you have bacteriological contamination,
e.g. Cryptosporidium or E-coli, you will also need a suitable filter for your drinking water which we can supply separately. Call us direct.
Yes, AQUABION® won’t interfere with the proper functioning of your septic tank, unlike salt-based water softeners (see above).
Not to any noticeable degree i.e. 0.01bar reduction.
No, but vertical is preferable- if no filter is installed BEFORE AQUABION®.
The lifespan of the AQUABION® depends on the volume of water that passes through it, the hardness of the water, and also by the conductivity and PH of the water.
No, there are commercial and industrial sizes also available. For further information on commercial and industrial requirements please contact us directly.
Your kettle heating element will have less damage caused by aggressive ‘hard’ limescale depending on your water quality from your water supply. You will still need to routinely clean out the newly formed Aragonite or ‘powdery’ scale which will coat some of the inside walls and base of your kettle but this will be much easier than with aggressive ‘hard’ scale. This will only require some brushing out and we supply a plastic brush with each AQUABION® for this purpose. Depending on the design of your kettle, it may still contain a layer of what appears like a ‘hard’ scale on the plastic base of the kettle. This occurs due to the constant boiling cycle causing expansion and contraction of the plastic base, just above the concealed element trapping some of the ‘powdery’ limescale. This is normal and easily removed. There are also various methods of preventing the scale from pouring out of the kettle e.g. mesh filters on the spout, wire wool balls which trap scale, etc. Don’t forget some limescale in your drinking water is desirable for the calcium and taste of the water etc. and routine brushing out ‘powdery’ scale is preferable to using the chemical descalers necessary for untreated ‘hard’ limescale, which you should have in your drinking water source with the alternative of water softeners.
AQUABION® will noticeably reduce calcification occurring on the face of your showerheads and clogging of the pin-holes. However, as with your kettle, it is important to routinely clean out your shower heads of the ‘powdery’ scale which may settle in the layers within the shower head. Brushing out or tapping out should do it or Vinegar for stubborn deposits rather than using chemical de-scalers. More importantly, the electric heating element will be much more resistant against hard calcification (scale build-up). If routine cleaning out is not carried out, in extreme cases, the ‘soft’ scale may back up into the heating element in electric showers causing failure.
Yes, but as I have explained already, the newly formed ‘powdery’ scale can be cleaned away much easier in your routine cleaning of the shower i.e. less need for aggressive cleaning agents.
The AQUABION® brochure lists the various sizes and specifications for each model. The rule of thumb is that a 1- bathroom house requires an AQUABION® S-15 (max. flow rate 400L/hour). However, if you have a pressurized water system, 2 or more pumped showers, or 2 or more bathrooms, we recommend you install an AQUABION® S-20 (max. flow rate 1500L/hour) but there are a number of variables that affect which is best suited. Contact us directly for advice on this.
A water softener works by ion exchange like AQUABION® but is exchanging Sodium (from Salt) for Limescale which is in some ways replacing one problem with another i.e. higher Sodium levels in your water in addition to the other disadvantages of water softeners – depending on the water quality from your water supplier (see Q 13 below).
Your Aquabion package comes installed with our latest and award winning 7 Stage Reverse Osmosis Drinking here
Osmio D7 Direct Flow RO – The Osmio D7 is a superb quality under sink Water Filter System. This removes all impurities from the drinking water supply via a dedicated filter tap. This system is worth €500 on it’s own
a) Drinking water: Water softeners use salt in the process to soften the water which results in Sodium being added to the water. If you are using a water softener you should not have that softened water supplying your drinking water tap. You should have a separate untreated mains supply for your drinking water because there can be health risks associated with the high Sodium levels in softened water.
b) Water softeners also remove healthy minerals from the water e.g. Calcium
c) You have to buy, carry and store bags of Salt to top up the water softener regularly which can amount to up to €100 p.a. or more – depending on your local water quality.
d) You may have to service it every year or so that it does not become contaminated.
e) Very high Sodium level in softened water can eventually cause damage to copper pipes and cause pitting and leaks.
f) Damage to the environment – Salt-based water softeners self regenerate i.e. they flush out water with higher Sodium and Potassium levels. This is an additional cost. In addition, this water gets recycled at municipal water treatment plants raising the level of Sodium in all of our mains water supply. This has already led to some bans and/or restrictions in some states in the USA (including Texas, California, and Massachusetts).
g) Water softeners can also interfere with septic tanks as the high Sodium levels can destroy good bacteria and diminish the drainage field’s ability to absorb excess water should a tank overflow with backwash.
Yes, but you may not be treating all of your water. Consult a plumber on where best to fit it or call us.
We would recommend the hiring of a qualified plumber. We include an installation guideline within every AQUABION®, read the instructions carefully.
N.B Always fit the bonding wire included, even on plastics pipe where short lengths of copper pipe must be added to take the bonding contact strips (see instructions).
If you only have a flat/apartment with an electric shower i.e. no hot water tank, no other appliances that heat up water, and wanted a solution for your shower only.
Yes, AQUABION®, as an electrolytic scale inhibitor, is recommended under Part L. The AQUABION® D-10 is the minimum size we would recommend for protecting a Combi-boiler but we always advise whole-of-house protection is preferable using either an AQUABION® S-15 or S-20 depending on circumstances.
Systems that use Polyphosphate dosing also require a regular top up with Polyphosphate crystals/liquid and maintenance, which can make them more expensive than AQUABION® in the medium to long-term. They may also become less effective over time e.g. dosing valves prone to clogging.
Magnetic and electrical systems are often incorrectly put in the same category as electrolytic systems such as AQUABION®. Some of these may provide a short-term single appliance solution but are much less effective for whole-of-house limescale treatment. Aggressive limescale reforms in the water downstream of these units over time unlike the permanent change affected by AQUABION®.
The average life span is 7 – 8 years, at which point the reaction within the AQUABION® will have been reduced to a level that is not as efficient anymore. At this point, you will begin to see again more hard scale forming on your kettle or your showerheads and this will tell you that you need a replacement.